| Accessory |
Description |
| System |
| Powerware
Battery Cabinets |
Battery
cabinets feature a wide range of available battery
sizes, optimized to meet application run time needs.
Multiple cabinets may be daisy-chained together for
extended battery runtimes. |
| Maintenance
Bypass Modules (MBM) |
This line
and match enclosed cabinet provides continuous
support for critical loads up to 300kVA during
servicing or testing of the UPS module. |
| Maintenance
Bypass Panels (MBP) |
The
maintenance bypass panel (MBP) is a separately
mounted enclosure that provides an alternate
electrical path for continuous support of the
critical load when servicing or testing the UPS
module. |
| Powerware
Sync Control |
Powerware
Sync Control features the ability to maintain
synchronization of the UPS system's output to a
fixed source allowing for uninterrupted transfers
between input sources with a static transfer switch. |
| Powerware Hot Sync
Redundant Parallel Tie Cabinet |
Powerware
Hot Sync Redundant Parallel Tie Cabinet allows
either UPS to be isolated from the input to perform
service while supported critical applications are
powered by the other UPS. |
| Powerware
System Bypass Module |
The
Powerware System Bypass Module (SBM) provides bypass
capability for UPS systems up to 2000 amp capacity. |
| Powerware
PowerHandler Plus |
The
Powerware PowerHandler Plus Switchboard System
Bypass Module was designed specifically for the
Powerware 9315 family of UPS. It allows up to eight
modules to operate in parallel, up to 4000 amps. |
| Remote
Emergency Power Off (REPO) |
In an
emergency, use this switch to turn off the UPS
output. The REPO switch de-energizes the critical
load and powers down the UPS immediately, without
asking for verification. The UPS, including Bypass,
remains off until manually restarted. |
| External
Battery Disconnect |
For
customers with installations that require locating
the battery system remotely from the UPS. |
| Communications |
|
PowerVision |
PowerVision
is Windows-based client/server software application
that provides monitoring, alarm notification and
data analysis for multiple Powerware UPSs within an
enterprise network. |
|
Remote Monitor Panel (RMP) |
Allows
a customer to monitor the operational status of the
UPS system from virtually any location within a
facility. The RMP utilizes simple backlit status
indicators and an alarm horn that notifies customers
of changes in the operational status of the UPS
system. This option can be installed in multiple
locations throughout a customer 's facility and in
parallel configurations can monitor both the UPS and
the SBM. |
|
Expansion
Chassis |
Three-slot
peripheral device that expands communication
capability for a UPS through its support for X-slot
cards. |
|
ModBus Card |
Interface
your UPS with your building maintenance monitoring
system. |
|
ConnectUPS SNMP/Web
Card |
Monitor
your UPS over the network using the web or SNMP. |
|
Relay Interface
Module |
The
relay interface module (RIM) provides multiple
computer shutdown and remote contact capabilities,
utilizing Form-C contact closures to support
multiple critical loads. |
