Powerware FERRUPS Rackmount UPS 60HZ Technical Specs

50HZ Specs

60HZ Specs

Operation
Part No.		FES- 850VA	FES- 1.15kVA	FES- 1.4kVA	FER- 1.8kVA	FER- 2.1kVA	FER- 3.1kVA	FER- 4.3kVA	FER- 7kVA
Nominal Input Voltage		120/208/240
Input Voltage Range		+15%, -20%
Operating Frequency		60 Hz (on-line - ±0.01 Hz to ±3 Hz adjustable, on inverter - ±0.005 Hz)
Nominal Output Voltage		120/208/240
Output Voltage Regulation		±3% for input voltages +15%, -20% of nominal. +5%,-8.3% for any line, load or battery condition.
Output Voltage Waveform		Sine Wave
Output Voltage		THD 6% or less THD at rated kW load
Overload Capacity		150% surge and 125% for 10 minutes on-line. 150% surge and 110% for 10 minutes on inverter.
Transfer Time		0 ms
Lightning, Surge, and Noise Protection		2000:1 spike attenuation using C62.41 and C62.45 Category A and Category B tests. Noise Rejection: Common Mode - >120 dB, Normal Mode - >60dB
Efficiency % (on-line)		85	88	88	90	90	91	90	90
Heat (on-line)	BTU/hr kW/hr	361 .106	372 .109	465 .136	474 .139	568 .166	742 .217	1138 .333	1896 .556
Battery Charger (DC)		12V, 4A	12V, 4A		48V, 4A			48V, 5A
Safety Certification		UL, CSA (CUL)
EMI Compliance		FCC Class A
Testing Standards		ANSI/IEEE C62.41 (1980); ANSI/IEEE C62.45 (1987); IEC 801-2, 801-4, 801-5
Communication		DB25 communication port with RS-232 serial communications, alarm and inverter contact closures, and EPO shutdown.
Environmental
Operating Temperature		0 to 40°C
Storage Temperature		-20° to +60° C (-20° to +40° C if battery not removed)
Relative Humidity		5 to 95% without condensation
Audible Noise (dBA)		48	50	50	50	50	51	50	52
Altitude		3050 m (10,000 ft.) maximum
Model Guide
Part No.		FES- 850VA	FES- 1.15kVA	FES- 1.4kVA	FER- 1.8kVA	FER- 2.1kVA	FER- 3.1kVA	FER- 4.3kVA	FER- 7kVA
Capacity (kVA/kW)		.8/.6	1.15/.8	1.4/1	1.8/1.25	2.1/1.5	3.1/2.2	4.3/3	7/5
Dimensions HxWxD	inches mm	9.75 x 16 x 21.25 248 x 406 x 540			9.75 x 16 x 26.25 248 x 406 x 667			16 x 16 x 26.25 483 x 406 x 667
Front Panel HxW	inches mm	10.5 x 19 267 x 483			10.5 x 19 267 x 483			19.25 x 19 489 x 483
Battery Pack HxWxD	inches mm	Internal			Internal			8.3 x 16.25 x 24.25 211 x 413 x 616
Weight (includes Batterys	lb KG	105 48	135 62	150 68	209 95	227 100	238 108	495 225	580 263
Input-Hardwired Connection Circuit Breaker Requirement (Contact factory for power cord options)		120=10A 208=5A 240=5A	120=15A 208=10A 240=5A	120=15A 208=10A 240=10A	120=20A 208=15A 240=10A	120=25A 208=15A 240=15A	120=35A 208 =20A 240=15A	120=40A 208=25A 240=20A		120=65A 208=40A 240=35A
Output Connection		Hardwired output is standard. Contact factory for receptacle options.
Typical Runtime: (minutes)	Full load Half load	11 28	19 49	14 36	31 73	24 58	14 35	26 61	12 33