Eaton Logo, links to the Eaton homepage

Powerware 9125 UPS Technical Specs

Model Selection Guide
Optional PDMs
Optional EBMs
Battery Runtimes
Available Options
Connectivity Option Cards
Electrical Input 700 - 3000 VA 5000/6000 VA
Nominal Voltage 120 Vac, 208 - 240 Vac 208 - 240 Vac
Voltage Range 120 V: 80-144 V (without using batteries)
208/230 V: 160 - 288 V (without using batteries)
123-208 V (without using batteries)
Input Power Factor >.95, typical >.96 in any mode
Frequency 50/60 Hz, auto-sensing
Frequency Range 45 - 65 Hz 50 Hz: 47-53 Hz
60 Hz: 57-63 Hz
Electrical Output
On Utility Voltage Regulation ±3% of nominal
On Battery Voltage Regulation ±3% of nominal
Efficiency 89 - 92%, depending on load >85% Online Mode; >90% High-efficiency Mode
Frequency Regulation ±3 Hz online; ±1 Hz on battery ±3 Hz online; ±1 Hz on battery;
±3 Hz High-Efficiency Mode
Load Crest Factor 3 to 1 ratio
Communications
Serial Port RS-232 communications port standard;
optional X-slot modules available
RS-232 and USB communications port standard;
optional X-slot modules available
Communications Cable 6-foot communications cable included
Battery
Internal Battery type 9 Ah, Sealed, lead-acid; maintenance free 7 Ah, Sealed, lead-acid; maintenance free
EBM Battery Type 9 Ah, Sealed, lead-acid; maintenance free 9 Ah, Sealed, lead-acid; maintenance free
On Battery Runtime See Battery Runtimes
Battery Replacement Hot-swappable internal and external batteries
Recharge Time <2 hrs. From complete discharge to 80% capacity at nominal line conditions
Start-On-Battery Allows start of UPS without utility input
General
Topology True online, double-conversion
Diagnostics Full system self-test on power up
UPS Bypass Automatic on overload or UPS failure
Dimensions and Weights See Model Selection Guide
Environmental and Safety
Safety Markings 120 V: UL, CSA and NOM
230 V: UL, CSA, VDE, CE, S, D, N, FI, B, NOM, R
208 V: UL, CSA
UL, cUL, VDE, CE, NOM, NYCE, GS
EMC Markings FCC Class B and VCCI Class II, 3000 FCC Class A FCC-A, VCCI-A, BSMI-A, C-Tick, CE Compliance
Surge Suppression IEEE/ANSI C62.41 Category B (formerly 587) ANSI C62.41 Category B3, and EN61000-4-5 Level 3 Criteria B
Audible Noise <45 dBA (on utility); <50 dBA (on battery)
Ambient operating 0°C to 40°C (32°F to 104°F); 0°C to 25°C (32°F to 77°F)
Heat Dissipation 2066 BTU/hr. Max
Leakage Current < .6mA Typical
Storage Temperature  
Relative Humidity 0 to 90%, non-condensing 5 to 90%, non-condensing
REPO Port NEC Code 645-11 intent and UL requirements
Network Transient Protector In and out jack for models only or 10Base-T network cable; protection. UL497A tested N/A

Specifications are typical and subject to change without notice due to continuing product improvement programs.

Go to top

Model Selection Guide

Model
Number1
Power Rating
(VA/Watt)
Input
Connection4
Output
Receptacles
Dimensions HxWxD
(in / mm)
Unit Wt.
(lb/kg)6
120 Vac Models2
PW9125
700
700/490 5-15P (6) 5-15R 3.5 x 17.0 x 19.4 /
89 x 432 x 494
34/15
PW9125
1000
1000/700 5-15P (6) 5-15R 3.5 x 17.0 x 19.4 /
89 x 432 x 494
34/15
PW9125
1500
1500/1050 5-15P (6) 5-15R 3.5 x 17.0 x 19.4 /
89 x 432 x 494
50/23
PW9125
2000
2000/1400 5-20P (6) 5-15R 3.5 x 17.0 x 19.4 /
89 x 432 x 494
50/23
PW9125
2000 20R
2000/1400 5-20P (2) 5-15R,
(4) 5-20R
3.5 x 17.0 x 19.4 /
89 x 432 x 494
50/23
PW9125
2500U
2500/1750  L5-30P (2)5-15R,
(2)5-20R
(1)L5-30R
3.5 x 17.0 x 23.9 /
89 x 432 x 607
81.5/37
PW9125
3000U 
3000/2100  L5-30P (2)5-15R,
(2)5-20R
(1) L5-30R
3.5 x 17.0 x 23.9 /
89 x 432 x 607
81.5/37
208 Vac Models3
PW9125
2500G
2500/1750 Detachable
L6-20P
(4) IEC 320-C13
(1) IEC 320-C19
3.5 x 17.0 x 23.9 /
89 x 432 x 607
81.5/37
PW9125
3000G
3000/2100 Detachable
L6-20P
(4) IEC 320-C13
(1) IEC 320-C19
3.5 x 17.0 x 23.9 /
89 x 432 x 607
81.5/37
PW9125
2500G HW
2500/1750 Hardwired Hardwired 3.5 x 17.0 x 23.9 /
89 x 432 x 607
81.5/37
PW9125
3000G HW
3000/2100 Hardwired Hardwired 3.5 x 17.0 x 23.9 /
89 x 432 x 607
81.5/37
230 Vac Models4
PW9125
1000i
1000/700 IEC 320-C14 (6) IEC 320-C13 3.5 x 17.0 x 19.4 /
89 x 432 x 494
34/15
PW9125
1500i
1500/1050 IEC 320-C14 (6) IEC 320-C13 3.5 x 17.0 x 19.4 /
89 x 432 x 494
50/23
PW9125
2000i
2000/1400 IEC 320-C14 (6) IEC 320-C13 3.5 x 17.0 x 19.4 /
89 x 432 x 494
50/23
PW9125
5000g HW
5000/3500 Hardwired (Hardwired 8.63 x 17.37 x 24.94 /
219 x 441 x 633
206/93.4
PW9125
5000g
5000/3500 L6-30P L6-30R 8.63 x 17.37 x 24.94 /
219 x 441 x 633
206/93.4
PW9125
6000g HW
6000/4200 Hardwired Hardwired 8.63 x 17.37 x 24.94 /
219 x 441 x 633
206/93.4
PW9125
6000g
6000/4200 L6-30P L6-30R 8.63 x 17.37 x 24.94 /
219 x 441 x 633
206/93.4
PW9125
6000g FC
6000/4200 L6-30P L6-30R 8.63 x 17.37 x 24.94 /
219 x 441 x 633
206/93.4

1 50/60 automatic frequency selection.
2 120 V models are 110 V, 120 V, 127 V user-selectable.
3 208 V models are 208 V, 220 V, 230 V, 240 V user-selectable.
4 230 V models are 208 V, 220 V, 230 V, 240 V user-selectable.   
5 Add 8.5 lb. for shipping weight.

Go to top

Optional POWERPASS Power Distribution Modules (PDMs)

Model1 Input Voltage (VAC) Output Voltage (VAC) Input
Connection
Output
Receptacles
Dimensions
(H x W x D)
Weight
(lb)
700 - 2000 VA Models
PPDM 700-1500 VA 120 120 6-ft, L5-15P
attached power cord
(6) 5-15R,
(1) L5-15R
for Laser Printer Unprotected
3.5 x 11.0 x 4.5 2.5
PPDM 2000 VA 120 120 6-ft, L5-20P
attached power cord
(6)5-15R  3.5  x 11.0 x 4.5 2.5
PPDM 700-2000 VA 230 230 IEC 320-C14
Input Connector
(6) IEC 320-C13,
(1) IEC 320-C13 
for Laser Printer Unprotected
3.5 x 11.0 x 4.5 2.5
2500/3000 VA Models
PDM2-LV-US-P1 120 120 6-ft, L5-30P
attached power cord
(6) 5-20R 
(1) L5-30R
3.0 x 17.0 x 23.9 20
PDM1-HV-US-P1 208-240 208-240 / 120 16A, IEC 320-C20 Input Connector
Country-specific, detachable power cord
(6) 5-20R 
(1) L14-30R
3.0 x 17.0 x 23.9 50
PDM2-HV-US-P1 208-240 208-240 16A, IEC 320-C20 Input Connector
Country-specific, detachable power cord
(1) L6-30R 3.0 x 17.0 x 23.9 20
PDM2-LV-US-HW 120 120 30A Terminal block
(3 terminals)
30A Terminal block
(3 terminals)
3.0 x 17.0 x 23.9 20
5000/6000 VA Models
PPDM, L6-30 208-240 208-240/120 L6-30P (1) L6-30R 
(8) 5-15R
5.25 x 17.37 x 24.75 106
PPDM, L6-20 208-240 208-240/120 L6-30P (1) L6-20R 
(8) 5-15R
5.25 x 17.37 x 24.75 106
PPDM, L5-30 208-240 208-240/120 L6-30P (1) L5-30R 
(8) 5-15R
5.25 x 17.37 x 24.75 106
PPDM, L14-30 208-240 208-240/120 L6-30P (1) 14-30R 
(8) 5-15R
5.25 x 17.37 x 24.75 106
PPDM, HW 208-240 208-240/120 Hardwired Hardwired 5.25 x 17.37 x 24.75 106
PPDM, EURO HW 208-240 208-240/120 Hardwired Hardwired 5.25 x 17.37 x 24.75 106
PPDM, L6-30&L14-30 208-240 208-240/120 L6-30P (1) L6-30R
(1) L14-30R 
(4) 5-15R
5.25 x 17.37 x 24.75 106
PPDM, L6-30 (2) 208-240 208-240/120 L6-30P (2) L6-30R
(4) 5-20R
5.25 x 17.37 x 24.75 106
PPDM, L6-20 (2) 208-240 208-240/120 L6-30P (2) L6-20R
(4) 5-20R
5.25 x 17.37 x 24.75 106

1 5000/6000 VA PDM Black Chassis Option, change order number from -55XX to -65XX

Go to top

Optional Extended Battery Modules (EBMs)

Model
Number1
Part Number Dimensions
(HxWxD)
Weight
(lb)
PW9125 24 EBM For
700/1000 VA models only
05146502-6591 3.5 x 17.0 x 19.4 65
PW9125 48 EBM For
1250, 1500, 2000 VA models only
05146074-6591 3.5 x 17.0 x 19.4 65
PW9125 72 EBM For
2500 & 3000 models only
103002836-6591 3.5 x 17.0 x 23.9 93
PW9125 240 EBM For
5000 & 6000 models only
103003387-6591 5.25 x 17.0 x 24.75 169
PW9125 48Vdc Extended Battery Cabinet 124100014-002 17.2 x 24.6 x 28.3 665

1 Black Chassis Option, change order number from -5501 to -6501 (for 700 VA - 2000 VA & 5000/6000 VA models only)

Go to top

Battery Run Times (in minutes)

700/1000 VA Models
Load Standard
Internal
Batteries
1 EBM 2 EBMs
200 VA/140 W 37 271 546
400 VA/280 W 19 142 278
700 VA/490 W 9 72 156
850 VA/595 W 6 59 124
1250 VA/875 W 11 46 87
1000 VA/700 W 5 48 104
1250-2000 VA Models
Load Standard
Internal
Batteries
1 EBM 2 EBMs 3 EBMs 4 EBMs
400 VA/280 W 46 177 331 501 682
700 VA/490 W 25 96 180 272 370
850 VA/595 W 21 76 142 214 292
1000 VA/700 W 16 61 115 174 237
1250 VA/875 W 11 46 87 131 179
1500 VA/1050 W 8 37 70 106 144
1800 VA/1260 W 6 30 57 85 116
2000 VA/1400 W 5 26 49 74 100
2500-3000 VA Models
Load Standard
Internal
Batteries
1 EBM 2 EBMs 3 EBMs 4 EBMs
1250 VA/875 W 16 57 90 150 200
1500 VA/1050 W 13 55 72 120 160
2500 VA/1750 W 7 28 48 68 88
3000 VA/2100 W 5 25 38 54 70
5000-6000 VA Models
Load Standard
Internal
Batteries
1 EBM 2 EBMs 3 EBMs 4 EBMs
1000 VA/700 W 64 179 308 448 -
2000 VA/1400 W 38 108 186 271 362
3000 VA/2100 W 34 70 122 178 237
4000 VA/2800 W 19 49 86 125 168
5000 VA/3500 W 13 37 65 96 128
6000 VA/4200 W 10 30 52 76 102
Run times are approximate and may vary with equipment, configuration, battery age, temperature, etc.

Go to top

Available Options

Part Number Description
05146726-5591 PW9215 700 - 3000 VA Mounting Rail Kit, 2-post 2U
05141562-0091 PW9215 700 - 3000 VA Mounting Rail Kit, 4-post 2U
103005156 PW9125 - 3000 VA Mounting Rail Kit, 4-post
103003226 PW9125 5000/6000 VA Mounting Rail Kit, Beach Grey
103003226-001 PW9125 5000/6000 VA Mounting Rail Kit, Black
103003227 PW9125 5000/6000 VA Pedestal Kit, Beach Grey
103003227-001 PW9125 5000/6000 VA Pedestal Kit, Black
05146871-5501 PW9125 700 - 3000 VA Seismic Kit, Three Unit (For 3 UPSs or EBMs)
05146875-5501 PW9125 700 - 3000 VA Seismic Kit, Five Unit (For 5 UPSs or EBMs)
103003229-5501 PW9125 5000/6000 Seismic Kit 3-unit (1-UPS, 2 PPDM or Battery) Beach Grey
103003229-6501 PW9125 5000/6000 Seismic Kit 3-unit (1-UPS, 2 PPDM or Battery) Black

Go to top

Connectivity Option Cards

Model Part Number
X-Slot Powerware Power Xpert Gateway Series 2000 Card 103005868-5591 
X-Slot ConnectUPS-X Web/SNMP/xHub Card 116750221-001
X-Slot ConnectUPS-M Card 05146288-5501
X-Slot Multi-Server Card 05146447-5502
X-Slot Relay Card (AS/400 compatible) 1018460
X-Slot Modbus Card 103002510-5501
Expansion Chassis (equipped with Modbus card) 5147063
E-mail this page Print this page
Copyright ©2008 Eaton Corporation.
All rights reserved.