PowerVision Management Software - Supported OS and Devices

PowerVision Editions - Supported Operating Systems

Windows

• Windows 2000 Server
• Windows 2000 Advanced Server
• Windows 2000 Server Professional
• Windows XP Home Edition
• Windows XP Professional
• Windows Server 2003 Standard
• Windows Server 2003 Web
• Windows Server 2003 Enterprise *

* Includes support for 32- and 64-bit processors
Note: It is recommended that you install the latest service packs and patches for the operating systems listed above.

Windows Minimum Requirements

• Installed TCP/IP networking
• 200 MHz processor
• 64 MB RAM (Recommended: 128 MB)
• 250 MB of available hard disk space (Recommended: 1.5 GB; depending on the number of devices being monitored)
• 30MB of available hard disk space
• For optimum viewing, set the monitor resolution to 1024 by 768 pixels and 16-bit color (thousands of colors) with the system task bar hidden.

Optional Items

• Local printer for hard copy outputs
• Sound card for assigning sounds to specific alarm conditions
• Modem for remote alarm notification

PowerVision Shutdown Agent - Supported Operating Systems

• Windows 2000 Server
• Windows 2000 Advanced Server
• Windows 2000 Server Professional
• Windows XP Home Edition
• Windows XP Professional
• Windows Server 2003 Standard
• Windows Server 2003 Web
• Windows Server 2003 Enterprise

UNIX

• HP-UX v. 10.x and higher
• IBM AIX v. 4.x and higher
• Sun Solaris v. 6.x and higher
• SGI Irix v. 6.3 and higher
• Linux (kernel version 2.2 and higher)
• BSD OS v. 4.x and higher

Novell NetWare

• Netware v. 4.11 and higher, requires TCP/IP

PowerVision Supported Devices

Uninterruptible Power Systems

• Powerware 5115 RM
• Powerware 5125
• Powerware FERRUPS
• Powerware 9 Prestige
• Powerware 9110
• Powerware 9120
• Powerware 9125
• Powerware 9150
• Powerware 9155
• Powerware 9170+
• Powerware 9305
• Powerware 9320
• Powerware 9330
• Powerware 9335
• Powerware 9340
• Powerware 9390
• IPM BP-IV
• Generic third party UPS
• Generic redundant units (1+1)

• Powerware 5115 RM
• Powerware 5125
• Powerware FERRUPS
• Powerware 9 Prestige
• Powerware 9110
• Powerware 9120
• Powerware 9125
• Powerware 9150
• Powerware 9155
• Powerware 9170+
• Powerware 9305
• Powerware 9320
• Powerware 9330
• Powerware 9335
• Powerware 9340
• Powerware 9390
• IPM BP-IV
• Generic third party UPS
• Generic redundant units (1+1)
• Powerware 9315
• Powerware 9315 Reverse Transfer Module
• Powerware 9315 Hot Sync Parallel Redundant (2 Module)
• Powerware 9315 Hot Sync Parallel Capacity UPM
  Powerware Hot Sync Parallel Capacity SBM
• Powerware 9330 Hot Sync Parallel (2, 3, or 4 Module)
• Powerware 93xx Hot Sync Parallel (2, 3, or 4 Module)
• B4000 (Modbus RTU/TCP)
• IPM BP-Plus
• IPM BP-II
• IPM BP-III

Other equipment types supported via the PowerVision DAT

• Air Conditioner
• Auto Transfer Switch
• CellWatch
• Fire Detection
• Flywheel
• Generator
• Intergy SM50
• Leak Detection
• PDU
• Security Alarm
• Smoke Detection
• Static Switch
• Switchgear
• TVSS

Connectivity Devices Supported

• ConnectUPS-X Web/SNMP 10/100 Card (X-Slot) (firmware v3.11 or higher required)
• ConnectUPS-E Web/SNMP 10/100 network adapter (firmware v3.11 or higher required)
• ConnectUPS-BD Web/SNMP 10/100 Card (X-Slot) (firmware v3.00 or higher required)
• ConnectUPS-M (firmware v4.01 or higher required)
• X-Slot Single Serial Port Card
• Multi-Server Card (firmware v2.05 or higher required)
• Expansion Chassis with compatible option card
• PowerVision DAT (PowerVision Facility Edition only)