Especificações Técnicas do Powerware 9355 20-30 kVA (América do Norte)

10-15 kVA Tech Specs Battery Runtimes Model Selection Guide Power Distribution Module Accessories

Power
Rating	20 kVA/18 kW and 30 kVA/27 kW 0.9 power factor
Topology	True double-conversion online UPS
Electrical Input
Nominal input voltage	208V/120V, 220V/127V+15, -20% 480V/277V, 600V (480+600 with transformer)
Operating frequency	50/60 Hz (45 to 65 Hz)
Input power factor	0.99 typical
Input current distortion	<5% THD
Electrical Output
Nominal output voltage	208/120, 220/120 Vac 480/227 with Output Transformer
Output voltage regulation	±1% Static; ±4% dynamic with 100% step load recovery within 1 ms response time
Efficiency	91% typical
Battery
Battery Type	9Ah, sealed, lead-acid, maintenance-free
Battery Run Time	See Battery Runtime Chart
Battery Replacement	Field-replaceable
Charger	Default is 3.4A per battery string. Charger current is configurable from 0.5A to 25A per string with an overall maximum of 34A (limited by input current)
Start-On-Battery	Allows start of UPS without utility input
General
Diagnostics	Full system self-test at startup
UPS Bypass	Automatic on overload or UPS failure
Parallel for Redundancy and Capacity	Yes, using Powerware Hot Sync technology
Dimensions and Weights	See Model Selection Table
Overload (Normal Operation)	150% for 5 sec / 125% for 1 min (online), 110% for 10 min
Communications
LCD Display	Graphical LCD with blue backlight
LEDs	(4) LEDs for notice and alarm
Audible Alarms	Yes
Communication Ports	(1) RS-232, (1) relay contact, (1) REPO, (2) environmental input
Communication Slot	(2) X-Slot communication bays
Power Management Software	Bundled Software Suite CD
Environmental
Operating Temperature	10ºC to +40ºC, +45ºC with 7.5% derating; Batteries recommended max. +25ºC
Storage Temperature	-15°C to +25°C
Relative Humidity	0–95%, non condensing
Audible Noise	< 58 dBA at 1 meter depending on load
Altitude	< 1000m at +40°C, < 3000m at +25°C
Certifications
Safety Certifications	IEC 62040-1-1, IEC 60950, EN 62040-1-1, UL 1778, NOM-0190SCP8-1993
EMC Compliance	EN 50091-2 Class A
Quality	ISO 9001: 2000 and ISO 14001:1996
Markings	UL, cUL, NOM-NYCE

Battery Run Times (in minutes)

VA	Watt	UPS  + Internal 1 Battery	Internal Battery Plus EBC - 36	Internal 1 Battery Plus EBC - 72	Internal 1 Battery Plus Qty 2 EBC - 72
30000	27000	11	31	56	89
29000	26100	11	33	58	90
28000	25200	12	35	60	93
27000	24300	12	38	62	95
26000	23400	13	40	65	98
25000	22500	14	43	68	101
24000	21600	14	46	71	103
23000	20700	15	48	74	106
22000	19800	16	51	76	109
21000	18900	17	53	79	111
20000	18000	18	56	82	114
19000	17100	19	58	85	117
18000	16200	20	62	88	120
17000	15300	22	66	92	130
16000	14400	24	71	96	142
15000	13500	26	75	101	154
14000	12600	28	79	105	166
13000	11700	31	84	110	178
12000	10800	35	88	114	201
11000	9900	38	94	119	256
10000	9000	42	101	134	251
7500	6750	58	117	188	347
5000	4500	90	188	294	543

Note: Backup times are approximate and may vary with equipment, configuration, battery age, temperature etc.

Model Selection Table

Order Number1			Description	Power Rating2 (kVA/kW)	Input & Output Voltages4	Battery Backup5	Dimensions HxWxD (in)	System Weight3 (lbs)
UPS Part (CTO) Number	1st Option Cabinet	2nd Option Cabinet
KB2013100000010	-	-	PW9355 with internal Battery	20/18	208/208	18	66 x 20 x 34.1	1160
KB2013100000010	KBT001100000010*	-	PW9355 with internal Battery and Single Feed Option Cabinet	20/18	208/208	18	66 x 40 x 34.1	1695
KB2013100000010	KBT001100000010*	KBT002100000010	PW9355 with internal Battery and Dual Feed (2 Opt Cabs)	20/18	208/208	18	66 x 60 x 34.1	2230
KB2013200000010	-	-	PW9355 with internal Battery	20/18	220/2202	18	66 x 20 x 34.1	1160
KB2013100000010	KBT001200000010*	-	PW9355 with internal Battery and Single Feed Option Cabinet	20/18	480/208	18	66 x 40 x 34.1	1695
KB2013100000010	KBT001200000010*	KBT002200000010	PW9355 with internal Battery and Dual Feed (2 Opt Cabs)	20/18	480/208	18	66 x 60 x 34.1	2230
KB2013100000010	KBT001300000010*	-	PW9355 with internal Battery and Single Feed Option Cabinet	20/18	600/208	18	66 x 40 x 34.1	1695
KB2013100000010	KBT001300000010*	KBT002300000010	PW9355 with internal Battery and Dual Feed (2 Opt Cabs)	20/18	600/208	18	66 x 60 x 34.1	2230
KB2013100000010	KBT001200000010*	KBT003200000010	PW9355 with internal Battery and Single Feed (2 Opt Cabs)	20/18	480/480	18	66 x 60 x 34.1	2230
KB3013100000010	-	-	PW9355 with internal Battery	30/27	208/208	11	66 x 20 x 34.1	1160
KB3013100000010	KBT001100000010*	-	PW9355 with internal Battery and Single Feed Option Cabinet	30/27	208/208	11	66 x 40 x 34.1	1695
KB3013100000010	KBT001100000010*	KBT002100000010	PW9355 with internal Battery and Dual Feed (2 Opt Cabs)	30/27	208/208	11	66 x 60 x 34.1	2230
KB3013200000010	-	-	PW9355 with internal Battery	30/27	220/2202	11	66 x 20 x 34.1	1160
KB3013100000010	KBT001200000010*	-	PW9355 with internal Battery and Single Feed Option Cabinet	30/27	480/208	11	66 x 40 x 34.1	1695
KB3013100000010	KBT001200000010*	KBT002200000010	PW9355 with internal Battery and Dual Feed (2 Opt Cabs)	30/27	480/208	11	66 x 60 x 34.1	2230
KB3013100000010	KBT001300000010*	-	PW9355 with internal Battery and Single Feed Option Cabinet	30/27	600/208	11	66 x 40 x 34.1	1695
KB3013100000010	KBT001300000010*	KBT002300000010	PW9355 with internal Battery and Dual Feed (2 Opt Cabs)	30/27	600/208	11	66 x 60 x 34.1	2230
KB3013100000010	KBT001200000010*	KBT003200000010	PW9355 with internal Battery and Single Feed (2 Opt Cabs)	30/27	480/480	11	66 x 60 x 34.1	2230

1. 50/60 Hz auto-sensing.
2. 220V units are wye connected 220/127V input and 220/127V output, 3-phase, 4-wire plus ground.
3. Weight is installed weight. To determine shipping weight, add 75 pounds.
4. An input neutral is required for all configurations unless the input isolation transformer is used.
5. Internal battery, full load.

Power Distribution Module (PDM)

Optional Recepticle Panels	Breaker	Voltage	Phase
(1) L15-30R	30A	208V	3
(1) L21-20R	20A	208/120V	3
(1) L21-30R	30A	208/120V	3
(2) 5-15R	15A	120V	1
(2) 5-20R	20A	120V	1
(2) 6-15R	15A	208V	2
(2) 6-20R	20A	208V	2
(2) L5-15R	15A	120V	1
(1) L5-20R1	20A	120V	1
(1) L5-30R1	30A	120V	1
(2) L6-15R	15A	208V	2
(1) L6-20R1	20A	208V	2
(1) L6-30R1	30A	208V	2
(1) L14-20R1	20A	208/120V	2
(1) L14-30R1	30A	208/120V	2
(2) IEC 320 C13 (120V)	20A	120V	1
(2) IEC 320 C19 (120V)	20A	120V	1
Blank panel

Accessories

Order Number	Description	Dimensions H x W x D (in)	Unit Weight (lb)
Powerware Hot Sync
124100020-001	10/15 kVA Parallel Cabinet	36 x 20 x 5.7	66
124100026-001	20/30 kVA Parallel Cabinet	48 x 20 x 5.7	75
103004336	HotSync CAN Bridge Card
Extended Battery Module (EBM) or Cabinets (EBC)
103004868	20/30 kVA EBC-72	66 x 20 x 31	2060
103005183	20/30 kVA EBC-36	66 x 20 x 31	1100
Seismic Mounting Kit
103004194-5501	Seismic Kit, Rated Zone 4, UL Tested, Performance rating based on NEBS GR-63-CORE Standard Vibration Test	Fits both 2-& 3-high models	136
Maintenance Bypass Module (MBM)
103004184-5501	Rear UPS-mounted Maintenance Bypass Module	16.5 x 12 x 7	15
124100020-001	Wall-mounted Maintenance Bypass 10/15 kVA	36 x 20 x 5.7	66
124100026-001	Wall-mounted Maintenance Bypass Module 20/30 kVA	48 x 20 x 5.7	75
Upgrades
103004657	10 kVA to 15 kVA
103005160	20 kVA to 30 kVA