Especificações Técnicas do Powerware 5115 (América do Norte)

Guia de Seleção de Modelos Autonomia da Bateria

Electrical Input
Voltage	120 and 230 Vac Nominal; see Model Selection Guide for user-selectable voltages
On Line Voltage Range	+20% for nominal voltage at full load
Nominal Input Frequency	45-65 Hz, 50/60 Hz; auto-sensing
Input Protection	120 V models: Reset-able circuit breaker 230 V models: AC source overcurrent protection device (required)
Connection	120 V models: 6 ft. cord w/5-I5P 230 V models: IEC-320, 10A male connector
Electrical Output
Power Levels	500-1400 VA
Online Regulation	-10%, +6% of nominal voltage
On Battery Voltage Regulation	+/-5% of nominal voltage; -10% after low battery warning
On Battery Frequency Regulation	+/-0.1 Hz of nominal frequency
Voltage Wave Shape	Sine wave (during normal and battery operation)
Connections	See Model Selection Guide
Interconnecting Cords (230V models)	2 ea. IEC-320, 10A
Indicators and Controls
Front Panel LEDs	Power on, on battery, overload, and battery fault
Front Panel Buttons	On/Off and alarm silence/self-test
Communications Port	DB9 female (UPS ships with communications cable); USB Interface Adapter is optional
Power Factor	500 VA: 0.64 750/1000 VA: 0.67 1400 VA: 0.68
Battery
Battery Type	Sealed, maintenance-free lead-acid; starved electrolyte
Battery Description	500 VA: (1) 12 V, 9 Ah 750 VA: (2) 12 V, 7.2 Ah 1000 VA: (2) 12 V, 9 Ah 1400 VA: (3) 12 V, 9 Ah
Battery Recharge	< 3 hours to 90% capacity
Battery Runtime	5 minutes minimum; See Battery Runtimes table
Start-On-Battery	Startup with UPS batteries in absence of utility power
General
Topology	Line-interactive
Dimensions and Weight	see Model Selection Guide
Network Transient Protector	In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested
Environmental and safety
Operating Temperature	0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF)
Safety Markings	UL, cUL, and CSA; 230V models also CE and TUV
Safety Conformance	UL 1778, CAN/CSA C22.2, No. 107.1; 230 V models also EN 50091-1-1 and IEC 60950
EMC Markings	FCC Class B; 230 V models also CE (EN50091-2) and C-Tick
Surge Suppression	ANSI C62.41 Category A (formerly IEEE 587)
Immunity	IEC 801-2, -3, -4
Transit/Storage Temp.	-15oC to 55oC (5oF to 131oF)
Audible Noise	< 45 dBA typical
Relative Humidity	5-95% non-condensing

* Due to continuing product improvement programs, specifications subject to change without notice

 Model Selection Guide

Model Number	Power Out (VA/Watts)	Input Connection	Output Connections	Dimensions HxWxD, (in./mm)	Unit Weight (lb/kg)
120 VAC1, 60 Hz auto-sensing
PW5115 500	500/320	5-15P	(4) 5-15R	7.6x5.9x10.6/193x150x270	17.2/7.8
PW5115 750	750/500	5-15P	(4) 5-15R	7.6x5.9x13.2/193x150x335	27.3/12.4
PW5115 1000	1000/670	5-15P	(6) 5-15R	15.1x5.9x13.2/380x150x335	27.8/12.6
PW5115 1400	1400/950	5-15P	(6) 5-15R	15.1x5.9x15.4/380x150x390	37.0/16.8
230 VAC2, 60 Hz auto-sensing
PW5115 500i	500/320	IEC-320, 10A	(4) IEC-320	7.6x5.9x10.6/193x150x270	17.2/7.8
PW5115 750i	750/500	IEC-320, 10A	(4) IEC-320	7.6x5.9x13.2/193x150x335	27.3/12.4
PW5115 1000i	1000/670	IEC-320, 10A	(6) IEC-320	7.6x5.9x13.2/193x150x335	27.8/12.6
PW5115 1400i	1400/950	IEC-320, 10A	(6) IEC-320	7.6x5.9x15.4/193x150x390	37.0/16.8

1 Also user-selectable for 110V via rear panel DIP switches.
2 230 V default; also user-selectable for 220 and 240 V via rear panel DIP switches

Battery Run Times (in minutes)

Load	PW5115 500(i)	PW5115 750(i)	PW5115 1000(i)	PW 5115 1400(i)
200 VA / 128 W	17	38	41	58
300 VA / 192 W	11	27	28	41
500 VA / 320 W	5	14	15	28
600 VA / 402 W10		9	10	19
750 VA / 503 W		6	8	14
900 VA / 603 W			6	10
1000 VA / 670 W			5	8
1200 VA / 804 W				6
1400 VA / 938 W				5